| |
|
View through the trunk. The bars shown go
through the speaker openings. |
|
| |
This is an image shot looking through the passenger
side rear wheel opening. The frame rail can be seen that will connect to the bars in the trunk.
|
Looking through
the passenger side door towards the trunk.
|
|
| |
If
you look close, you can see the safety harness tab that is welded to the horizontal bar.
|
|
|
| |
After chalking
and paint.
|
|
|
| |
I wanted the door bars
to have a slight bend in them for easy access, but still be NHRA legal. The bent makes it so I can still use the armrests.
|
|
|
| |
|
This is a view showing how the frame rail passed through
the floor and the angle needed to tie in with the torsion bar crossmember. If you look close, you can see the tab for
the safety harness.
|
|
| |
|
This is where
the frame rail passes through the floor under the car.
|
|
